Tapp-fibo Appendix Mounting
Intervjuu Priit Pallum
During the interview, the following topics will be discussed:
Demolis or renovate?
* The interview is in Estonian.
RESISTANCE TO FIRE
Due to the large-pored structure Fibo blocks and relatively low thermal conductivity is very high degree of fire resistance Fibo masonry. Fibo blocks can be used for Non-load-bearing, and the intermediate and outer walls. Fibo brickwork retains largely the carrying capacity of a fire and it is easy to recover later in most cases.
Fibo blocks plastered on the walls of the materials due to the difference in density with good airborne sound insulation. Fibo blocks plastered walls can be used as sound-damping wall.
Due to the porosity of the lightweight concrete with a filler and ceramic blocks ensure a good frost resistance properties. If frozen, the moisture is sufficient space on the ice crystal formation. Blocks draining the free water, as the volume is poorideväline permeable, non-absorbent by capillary action, and the inner volume of the pores are closed. It does not freeze in the blocks, provided that the blocks are not located in water. Fibo blocks frost resistance of 50 cycles.
WATER ABSORBATION AND MOISTURE CONTENTS
Fibo blocks absorb water to a very small extent, and the reason for this is jämepoorne material structure that does not allow moisture to be spread by capillary action. Due to the low water absorption of the masonry blocks and the krohvimördil kivinemistingimused good even in a thin layer, as the mortar of the water in the transmission of the blocks is minimized.
Tapp Appendix Fibo Block NEW!
Since 2016 Spring, we have renewing the entire range of Fibo blocks. The main differences between the previous "generation" is a bulleted Appendix vertical in the joint.
These innovations can achieve much more than it seems, and the effect that you want to provide a constructor:
TAPP-Appendix Vertical joint works without mortar
- mortar and saving speed + typesetting wall keeping a straight line
- fewer joints
- smoother wall surface
- finishing materials savings
Wall can be done more quickly and more favorably finished
design can handle even the person - no need to hire a builder
Competitions will be held on the 13th and 14th of March for people to test their knowledge and participate in various workshops and competitions.
The competitions is open for everyone! Each competition requires different skills and a whole new mindset. There are no age restrictions.
Registration for participation in the competitions is MANDATORY!
The sixth BuildIT conference will be held on the 13th March. This years main topic of the conference is Renewable Energy Infrastructure. We will be gathering experts from both Estonia and abroad to share their knowledge with us.
TalTech assembrly hall
The Conference will take place in TalTech Assembly Hall (U01- 202).
The BuildIT live!
The 6'th BuildIT conference and competition will be held on the 13th - 14th of March. This will feature Renewable Energy Infrastructureas as the main topic. We will be gathering experts from both Estonia and abroad to share their knowledge with us.